Isokinetic sampling
Most simple version:
- Heated inox probe Ø25mm with fixed inner tube
- Gooseneck with nozzle
- Plane filter device (filter assembly) for Ø45,47 or 50mm filters (dust content 0...50mg/m³) or tubular filter device (dust content 20...1000mg/m³)
- Small heater with temperature sensor for filter device. Power 400W.
Simple out-stack dust sampling probe
Jumatherm dual temperature controller for probe and filter device heater
Unheated probe tube Ø25mm OD with G1/2" threaded connection
Lengths 500mm, 1000mm, ... max. 3m.
Special lengths on request
Multiple short pieces can be combined into one long probe.
Various filterhead configurations possible, see attached document.
simple unheated in-stack probe
Isokinetic sampling probe
Integrated thermocouple and pitot tube
Electrically Heated
Stainless steel or titanium
Fixed inner tube in stainless steel or titanium
Interchangeable inner tube in stainless steel, titanium or (quartz)glass
Nozzle and filterholder mountable in-or out-stack
All lengths available
Probe combined with thermocouple and pitot
Combined probe
- Integrated thermocouple and pitot tube
- Heated or non-heated
- Stainless steel or titanium
- Fixed inner tube in stainless steel or titanium
- Interchangeable inner tube in stainless steel, titanium or (quartz)glass
- All lengths available
In-stack dust sampling with combined probe thermocouple and pitot
Combined probe with small heater for OUT-Stack dust sampling
- Integrated thermocouple and pitot tube
- Electrically heated
- Stainless steel or titanium
- Fixed inner tube in stainless steel or titanium
- Interchangeable inner tube in stainless steel, titanium or (quartz)glass
- All lengths available
Combiprobe for OUT-Stack dust sampling
Watercooled probe for dioxine sampling or in case of very high stack temperature (1100°C)
Suction tube only or as combined probe with thermocouple and pitot
Interchangeable inner tube in titanium or (quartz)glas
All lengths available
Watercooled probe
Control unit ITES for automatic isokinetic sampling, regulation and data storage directly on laptop, complies to EN13284-1 and all other recent EN, ISO en VDI standards
English manual available.
Software updates free if you own an ITES.
Software can be installed on more pc's.
Automated isokinetic sampling
GMU-Cascade Impactor Johnas II for measurement of PM10 and PM2,5 or PM4 in emissions, official validated version according to ISO 23210 and VDI 2066 part 10. Completely in titanium.
Cascade Impactor Johnas PM10 and PM2.5